Copper Alloy Olets Manufacture and Exporter
Kencotube is a known manufacturer of Copper Nickel Olets Fittings, which finds its greatest application in areas of high temperatures and pressures combined with high velocity and destructive turbulence. Copper content and nickel content in these Copper Nickel Outlet Fittings are completely soluble in each other, giving rise to a range of alloys that includes both copper-nickel (Cu-Ni) and nickel-copper alloys. Cu-Ni Olets Fittings is the stronger with yield strength in the annealed condition of ~150MPa compared with 120MPa of the lower nickel alloy. Cupronickel Olets Fittings is probably the most used grade as it is less expensive than the higher nickel alloy. The small iron content in Cu-Ni Outlet Fittings, gives an extraordinary resistance to general corrosion and stress corrosion cracking, making it very suitable and ideal for the marine or industrial industries.
UNS C70600 Cu-Ni 90/10 Outlet Fittings, Copper Nickel 70/30 (C71500) Olets Fittings Dealers, ASTM / ASME SB 61 UNS NO. C92200 Branch Fittings Olets Exporters, ASTM / ASME SB 62 UNS NO. C83600 Branch Connection Fittings Manufacturers and Suppliers.
Cupronickel Outlet Fittings are single phase and cannot be hardened by heat treatment, where the only method of increasing tensile strength is by cold working which, when the metal is in the fully hard condition, can match that of good quality carbon steel. Work hardening in Copper Nickel Alloy Olets Fittings, however, has implications with respect to welding in that there will be some strength loss in the HAZs. Low strength region in Copper Nickel Alloy Outlet Fittings can cause problems during welding procedure qualification testing of transverse bend coupons, most of the deformation being concentrated in the narrow area of strength loss.
Copper Nickel Welding Outlet, Copper Nickel Threading Outlet Stockholders, Copper Nickel Socket weld Outlets, Copper Nickel Sweep Outlets Stockists, Copper Nickel 45 Deg Outlets, Copper Nickel 90 Deg Outlets, Copper Nickel Nipple Outlets Manufacturers.
Specifications ASTM B366, B61, B62, B151, B152, / ASME SB366, SB61, SB62, SB151, SB152 Standard ASME/ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799 etc Size ¼” to 24″ Connect Type Welded, threaded, BW, SW Grades ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI-90/10), C 71500 ( CU -NI- 70/30), ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C12200. Copper Nickel Equivalent Grade
STANDARD WERKSTOFF NR. UNS Copper Nickel 90/10 2.0872 C70600 Copper Nickel 70/30 2.0882 C71500 Copper Nickel Chemical Composition
Grade Cu Pb Mn Fe Zn Ni Cupro Nickel 90/10 88.6 min .05 max 1.0 max 1.8 max 1 max 9-11 max Cupro Nickel 70/30 65.0 min .05 max 1 max 0.4-1.0 1 max 29-33 Copper Nickel Alloy Mechanical Properties
Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Cu-Ni 90/10 0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 % Cu-Ni 70/30 0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 % Other Types of Copper Nickel Olets
- Copper Nickel Branch Olets Fittings
- Copper Nickel Outlet Fittings
- Copper Nickel Welding Outlet Fittings
- ASME SB62 Copper Alloy Olets
- Copper Nickel O Lets Fittings
- Copper Nickel Alloy Olet Fittings
- Copper Nickel Olets Branch Fittings
- Copper Nickel Insert Weldolet
- Copper Nickel Nipoflange
- Copper Nickel Flexolet Threaded
- ASME SB366, SB61 Cu-Ni 90/10 Olet Fittings
- ASTM B366, B151 Cu-Ni 70/30 Branch Fittings
- Copper Nickel Flexolet Butt Weld
- Copper Nickel Flexolet Socket Weld
- ASTM B152 Cupro Nickel Olets